Prikazujemo 1–16 od 116 rezultata
AC CONTROL BOX
AC CONTROL BOX
The control boxes made by Electronic MZ cover the full range of ORVEA and Italwinch winches. They can be powered by 230V or 400V (single phase or three phase), for power up to 15 HP.
Capable of managing ascent and descent, 2 motors and electronic chain counter. Possibility of supplying low tension starters with inverter, for Up and DOWN speed regulation through handheld with potentiometer.
ACHILL
Capstan winch for recovering the tender boat with anodized aluminium drum already set for belt and snap-hook fastening (not supplied as standard with the product).
AISI STEEL FOOT SWITCH
AISI STEEL FOOT SWITCH
Perfectly watertight control for relays or other loads, which can be activated by the simple pressure of your foot.
Perfect watertight execution- Max. loading: 4 A. Inox steel base.
Fitted with a hinged AISI steel flap cover in order to avoid fortuitous operation.
Control button in sea water resistant silicon rubber.
Aleph – AL3
- Vertical windlasses
- Base in anodized aluminium in hard oxide
- With and without drum
- Rope and chain on a single gypsy
- Integrated sensor and magnet for chain counter
- Manual Free-Fall system
- Emergency manual lift system
- Supplied with pressure lever
- Inspection lid
- IP67 watertight motor
- Anodized aluminium gearbox
ARADO
ARADO is a stainless steel A/SI 316 vertical windlass. Available with differ• ent motorization it‘s suggested for boats up to 50 meters. The ARADO can bring chain up to 20,5 mm with stud link size. All the models for stud link chains support kenter link. Possibility to have different motor supply: 230\1,
Bronze – Chromed bronze or stainless steel vertical windlass. Available in high or low profile, with different drives and recommended for boats up to 60 m. ARADO PLUS can use chains up to 24 mm With stud link in diameter. Possibility of 230V, 400V or hydraulic drive
ARAN
Chromed bronze capstan winch, with different drives and recommended for boats up to 28 m.
Stainless steel AISI 316 capstain winch, with different drivws and recommended for boats up to 28 meters. Possibility of 24V, 230V, 400V of hydraulic drive.
BALDER XY
Model | BALDER FF 600 X/Y | |
MOTOR OUTPUT | 600 W | |
Motor Supply voltage | 12 V | 24 V |
Maximum working load | 200 Kg / 441 lb | |
Maximum speed | 25-28 m/min 82-91 ft/min |
|
Weight | 9,0 Kg / 19.8 lb |
BILAC001
BILAC001
BILAC-001 is a switch with two stainless steel sensors, which detects the presence of water in the boat bilge and controls the drain pump.
Thanks to two stainless steel sensors, the BILAC001 switch detects
the presence of bilge water and automatically activates the
relative drain pump. Is is perfectly suitable to any kind of bilge pump and to any size of craft.
Suitable for bilge pumps up to 20A
BILAC002
BILAC002
Thanks to two stainless steel sensors, the BILAC002 panel detects
the presence of bilge water and automatically activates the
relative drain pump. BILAC002 panel, it also transmits an audio and visual alarm directly to the bridge in
the event of a pump malfunction. Both pieces of equipment are
perfectly suitable to any kind of bilge pump and to any size of craft.
Suitable for bilge pumps up to 20A
BOW ROLLER – CHAIN STOPPER
BOW ROLLER – CHAIN STOPPER
Italwinch supply a wide range of accessories for the windlass: different
models of bow roller with chain stopper and claw integrated,
only chain stopper or chain rollers. All these models are made in
stainless steel and can be custom made under the requests of the
customer.
CAESAR
White painted horizontal axis winch. The CAESAR can use chains from 14 mm to 24 mm with stud link in diameter. With different drives and recommended for boats up to 70 m.
CALIBRATED CHAIN
CALIBRATED CHAIN
We have a complete range of calibrated chains in stainless steel AISI 316 or hot dipped galvanised up to a maximum 22mm of diameter. (ISO or DIN766)