Prikazuje se svih 9 rezultata

CAESAR

White painted horizontal axis winch. The CAESAR can use chains from 14 mm to 24 mm with stud link in diameter. With different drives and recommended for boats up to 70 m.

DEVON

Anticorodal anodized aluminium horizontal windlass. Devon can
use chains from 6 mm 8mm to 10 mm (DIN766 or ISO) in diameter.
With different drives and recommended for boats up to 15m. It comes as standard with chaincounter sensor on board.

ESK – ACHERON

White painted horizontal axis winch. The ESK can use chains from 12 mm to 16 mm in diameter. With different drives and recommended for boats up to 32 m.

White painted horizontal axis winch. The ACHERON can use chains from 14 mm to 17,5 mm with stud link in diameter. With different drives and recommended for boats up to 37 m.

FYN

Fyn (0530) horizontal windlass with aluminium gearbox white painted and chromed bronze drum. Chromed bronze barbotin for 8mm � 10mm ISO � 12mm ISO chains. Suitable for boats up to 17mt.

GIGLIO

Giglio manual windlass has a double effect drive system.
It comes with aluminium gear box white painted and independent anodized aluminium drum and chromed bronze gypsy.

IKI – IKI PRO

Safety standards and certifying bodiesrequire peremptorily that, during thestanding of the anchor, the load must beheld by a chain stopper or a highresistance fixing point.The user is responsible for guaranteeingthat during navigation the anchor isproperly stowed and fixed. Thisprecaution is moreimportant when thenavigation speed is higher and seaconditions are worse. Indeed, an anchorpaid out by mistake during navigationcan have very serious effects.Considering its position and not alwaysfrequent use, the anchor windlass isparticularly exposed to oxidationandcorrosion risk; therefore, it is necessaryto arrange a constant inspection of itsparts and a due maintenance.Make sure to have read and understoodevery part of this manualbeforeproceeding with installation and use.Only persons who know how tooperateshould be authorised to use the anchorwindlass. Should there be doubts on itsinstallation or use, refer always to askilled consultant.•Anchor windlasses used in aninappropriate way can causedamagesto persons and/or things.• Pay the utmost attention during theuse of powerful equipment.• Even the most careful use can be asource of damages, even serious.• Italwinchproducts are suppliedexclusively for recreationalnauticaluse. Italwinchdeclines allresponsibilityfor improper uses.• Pay the utmost attention so that arms,legs, fingers, hair, and clothes do notget entangled in the chain or gipsy.• Before operating the capstans, makesure that there are no persons in waterin the vicinity

NH – 24

Stainless steel horizontal axis windlass. The NH-24 can use chains up to from 24 mm with stud link. With different drives and recommended for boats up to 80 meters. Avaliable in different drum and gypsy configurations. For the version see the windlass configuratio table.

OBI 500 – 1000

Horizontal axis windlass made in anodized aluminium alloy, with chromed gipsy cover. Available in two different models Obi-500 and Obi-1000, which are both supplied with manual chain freefall system, the former with 500 W motorization (12V or 24V) and gipsy for 6mm or 8mm chains. Obi-1000 is available with 700W, 1000W or 1400W motorization (12V or 24V) and gipsy for 6mm, 8mm or 10mm chains

RAJA

Horizontal axis winch white painted model. The RAJA can use chains from 10 mm to 14 mm in diameter. With different drives and recommended for boats up to 26m.

 

Safety standards and certifying bodiesrequire peremptorily that, during thestanding of the anchor, the load mustbeheld by a chain stopper or a highresistance fixing point.The user is responsible for guaranteeingthat during navigation the anchor isproperly stowed and fixed. Thisprecaution is moreimportant when thenavigation speed is higher and seaconditionsare worse. Indeed, an anchorpaid out by mistake during navigationcan have very serious effects.Considering its position and not alwaysfrequent use, the anchor windlass isparticularly exposed to oxidationandcorrosion risk; therefore, it is necessaryto arrange a constant inspection of itsparts and a due maintenance.Make sure to have read and understoodevery part of this manualbeforeproceeding with installation and use.Only persons who know how tooperateshould be authorised to use the anchorwindlass. Should there be doubts on itsinstallation or use, refer always to askilledconsultant