Prikazujemo 1–16 od 36 rezultata
The control boxes made by Electronic MZ cover the full range of ORVEA and Italwinch winches. They can be powered by 230V or 400V (single phase or three phase), for power up to 15 HP.
Capable of managing ascent and descent, 2 motors and electronic chain counter. Possibility of supplying low tension starters with inverter, for Up and DOWN speed regulation through handheld with potentiometer.
Perfectly watertight control for relays or other loads, which can be activated by the simple pressure of your foot.
Perfect watertight execution- Max. loading: 4 A. Inox steel base.
Fitted with a hinged AISI steel flap cover in order to avoid fortuitous operation.
Control button in sea water resistant silicon rubber.
BILAC-001 is a switch with two stainless steel sensors, which detects the presence of water in the boat bilge and controls the drain pump.
Thanks to two stainless steel sensors, the BILAC001 switch detects
the presence of bilge water and automatically activates the
relative drain pump. Is is perfectly suitable to any kind of bilge pump and to any size of craft.
Suitable for bilge pumps up to 20A
Thanks to two stainless steel sensors, the BILAC002 panel detects
the presence of bilge water and automatically activates the
relative drain pump. BILAC002 panel, it also transmits an audio and visual alarm directly to the bridge in
the event of a pump malfunction. Both pieces of equipment are
perfectly suitable to any kind of bilge pump and to any size of craft.
Suitable for bilge pumps up to 20A
Italwinch supply a wide range of accessories for the windlass: different
models of bow roller with chain stopper and claw integrated,
only chain stopper or chain rollers. All these models are made in
stainless steel and can be custom made under the requests of the
customer.
We have a complete range of calibrated chains in stainless steel AISI 316 or hot dipped galvanised up to a maximum 22mm of diameter. (ISO or DIN766)
ELECTRIC FOOT SWITCHELECTRIC FOOT SWITCH Electric foot switch allows the control of any kind of windlass, by means of the pressure of the foot on it.It can be easily connected to control boxes produced MZ Electronic or to any relay which has the function of normally open contact.It operates both 12V and 24V with a maximum 5A current.It is supplied with security cover, which avoids any accidental operation.The device is supplied assembled and ready for installation.
PAY ATTENTION:All connecting operations must be made while the battery is disconnected.
Installation procedure:
Make a hole on the deck in order to let the cables in, using the drilling template attached.
Connect foot switch cables to the control box, following the electric scheme supplied with the control box.
Fasten the footswitch to the deck, as they help in making the device perfectly watertight.
Reconnect the device, controlling its functioning.
size: l 50 x p 22 x h 145
Built for direct current applications and perfectly watertight, these remote controls are available in 2, 3, 4, 6 or 8 controls in order to command anchor winches, crabs and gangways. Provided with an anatomic shape and an ergonomic soft rubber side grip in order to have a higher gripping power, they allow an outstanding freedom of movement, and thanks to their accurate ultra-modern design they are perfect for any kind of usage and craft.
size: l 60 x p 60 x h 18
The chaincounter EV011 is compact, small and extremely performing in order to be employed with equipments which are already provided with windlasses’ control units, but do not have any chaincounter. It is easy to be installed and compatible with any kind of windlass on the market, it displays the measure of the chain lowered in metres or feet. Guaranteed protection rating IP56 and universal power supply 12/24Vdc.
TECHNICAL CHARACTERISTICS OF THE CHAIN COUNTER:
– Simple and immediate use
– Choice between meters or feet as unit of measure
– High resolution alphanumeric LCD
– Universal supply voltage(12-24V)
– Watertight case IP 56
– the device doesn’t control the windlass
Manageable thanks to its extensible cable until 4 mt, light and ergonomic, the remote control with plug and socket kit is ideal to be directly used from one privileged emplacement beside the winch and then to be comfortably put back until the new manoeuvres.
TECHNICAL CHARACTERISTICS OF THE CHAIN COUNTER:
– Indications in 5 languages
– Simple and immediate use
– Up alarm function
– Automatic descent function
– Display of the manoeuvres speed
– Display of the power supply voltage of the motor
– Choice between meters or feet as unit of measure
– High resolution LCD display
– Adjustable Lighting system display
– Adjustable Contrast display
– Universal Feeding (12-24V)
– Watertight case IP 56
size: l 100mm x p 100mm x h 18mm
Compact, with elegant and functional design, it’s perfect for every flybridge and every winch in commerce. In order to have always under control the anchorage manouvres.
TECHNICAL CHARACTERISTICS OF THE CHAIN COUNTER:
– Indications in 5 languages
– Simple and immediate use
– Up alarm function
– Automatic descent function
– Display of the manoeuvres speed
– Display of the power supply voltage of the motor
– Choice between meters or feet as unit of measure
– High resolution LCD display
– Adjustable Lighting system display
– Adjustable Contrast display
– Universal Feeding (12-24V)
– Watertight case IP 56
This radio chain counter offers the elegance of Evolution line and practice connections. The receiver is easily mounted near magnetic sensor and the instrument is mounted on flybridge connecting only the battery and anything else.
WORKING FREQUENCY 868 MHz
Without cable ties, plug or panels and with always perfect load thanks to its rechargeable battery, the radio chain counter gives finally all the freedom of manoeuvres and the comfort of reading during the anchorage operations.
WORKING FREQUENCY 868 MHz
TECHNICAL CHARACTERISTICS OF THE CHAIN COUNTER:
– Indications in 5 languages
– Simple and immediate use
– Up alarm function
– Automatic descent function
– Display of the manoeuvres speed
– Display of the power supply voltage of the motor
– Choice between meters or feet as unit of measure
– High resolution LCD display
– Adjustable Lighting system display
– Adjustable Contrast display
– Universal Feeding (12-24V)
– Watertight case IP 56
ONLY FOR EV040
– Rechargeable radio control with cigarette lighter
– Display of the charge level of the radio unit
Transmitter:L 52mm x H 98mm x P 26mm
Receiver: L 150mm x H 57mm x P 32mm
Just like the remote control units, the MZ radio control units can command anchor winches, crabs and gangways and are easy to use thanks to the handy remote control feature. Available in 2 and 4 channels, with an IP67 watertight receiver and transmitter
The Kompass-8 remote control can handle up to 8 channels of transmission
operating two winches and the bow and stern thrusters. With
the shortcut key is also possible to operate simultaneously two thrusters,
making even easier the mooring. Floating transmitter IP67. Attendance
868Mhz or 913Mhz.
The magneto-hydraulic breaker protects motor from overcharges and short circuits. It has been studied for D.C. employ and it intervenes in case of over-current breaking the circuit in order to avoid to damage the motor. It is available in three versions, according to the capacity of the motor, power supply 12/24Vdc.