Prikazuje se svih 14 rezultata
Simple and reliable watermaker. Available in one piece or modular version in steel Inox AISI 316 structure for easy installation and maximum reliability over time.
Automatic proportional dosing system, for in-line dosing of sterilizing substances.
Elefantino is a portable device capable of filtering, dechlorinating and softening water. It is equipped with a filter for the removal of suspended solids, chlorine, foul odors, insecticides and an ion exchange water softener for the elimination of calcium carbonates. The volume of water treated with ELEPHANTINE depends on the hardness (° F) of the water entering the system. The diagram below shows the amount of water that ELEFANTINO can soften in relation to its hardness. Based on this data, it is easy to decide when to regenerate. (Eg: with a hardness of 30 ° F, regeneration is carried out every 1000 liters of treated water).
Elefantino X2 is a water softening system manufactured for installation on medium and large yachts. Despite its small size, the duplex system allows the Elefantino X2 to supply softened water continuously. In fact, when one tank is in use the other is in regeneration or stand-by mode ready to be used with calcium free water. The calcium in water is the most responsible culprit for scale build up in steel parts, windshields, portholes, faucets, sinks, showers, boilers, washing machines, dishwashers, etc.
Capacity 500 lt / h. Available in X2B version with 1000 l / h capacity.
Last generation Automatic Watermaker. One touch operation with the possibility of a full color Touch Screen controller.
Equipped with an Automatic Pressure setting and Automatic Flushing system, the watermakers of the EVO line can fully operate and perform self maintenance functions without the need of an operator. The electronic control unit can interface with supervision systems via the RS 485 BUS protocol. Supplied in monobloc or in modular version on AISI 316 stainless steel frame for easy installation and maximum reliability over time.
Latest generation of automatic watermakers that meets the needs of large yachts. One touch operation with color touch screen. Equipped with an automatic pressure regulation and automatic flush system, the MEGA line desalination system is able to completely manage and perform its functions without an operator. The electronic control unit can interface with the monitoring system via the RS 485 BUS protocol. Available in a one-piece unit or a modular version in steel Inox AISI 316 for easy installation and maximum reliability over time.
Multi cartridge filter entirely PVC – U for a high corrosion resistance, with flanged top opening, EPDM sealing gasket, air valve, pressure gauges entry and exit and valve
drainage. Compliant with the Directive European 2014/68 / EU for pressure vessels (PED).
Multi-cartridge filters in stainless steel, consisting of two shells, with funds molded crowns, made of sheet steel stainless and joined by two welded flanges, with one interposed toroidal elastomer seal. The flanges are tightened by a special closure Clamp type. Inside the shell a septum is welded below separation, in stainless steel, for the support and packaging of the filter cartridges. Equipped with n. 3 legs of support, inlet and outlet sleeves, vent valve, inlet and outlet pressure gauges, drain valve.
Automatic Energy Recovery Watermaker, equipped with Osmosea® Pressure Intensifier. Compact and easy to install thanks to its one piece structure. One touch operation with the possibility of color Touch Screen, the New12 line desalination systems are able to manaage and excute functions without the need for an operator. The electronic control unit can interface with supervision systems via the RS 485 BUS protocol. Direct power supply from batteries.
Semi Automatic Energy Recovery Watermaker, equipped with Osmosea® Pressure Intensifier.
Same configuration as the New12 S line but with Micro PLC Control Unit for more accurate monitoring. Direct Battery supply, easy installation, compact size.
Energy Recovery Watermaker, equipped with Osmosea® Pressure Intensifier.
Simple, Essential and Economic. Direct battery power supply, easy installation, compact dimensions and no electronics.
Pre Multilayer Sand Filters with variable particle sizes, reinforced VTR cylinder and integrated backwash system. Equipped with a stainless steel structure for base or wall mounting with the option of integrating the sea water pump.
Flow from 300 to 12000 lt/h.
Wash tank for desalination system equipped with a 3-way valve for selecting the ricycling phase with chemical agents or drainage. Everything included to winterize the watermaker without having to disconnect the pipes drom it. Comes equipped with a stainless steel structure for wall or base mounting.