Prikazuje se svih 9 rezultata

AirJet 12/24

AirJet 12 e AirJet 24 are the exclusive and innovative sea water cooled boat air conditioner directly powered in 12V or 24V (direct current) from the battery bank of your boat, without using a generator or an inverter.

AirJet 12/24 is a well designed and elegant product which offers the most simple and versatile installation. According to the volume available on board for its installation, it is possible to choose between the split arrangement or 2 self contained arrangements, horizontal or vertical. AirJet 12/24 is the ideal solution for cooling single cabins. The heart of this air conditioner is a semi-hermetic horizontal scroll compressor using an advanced brushless DC motor (BLCD) which allows the direct connection to the boat’s battery bank, also avoiding, through a dedicated program of the compressor control driver, the start – up peak.

The blower can be rotated allowing many installation options according to the path of the air ducts.
The best quality of the treated air is assured by the installation of an easily removable and washable filter. Each unit is pre-charged, leak checked and tested in all operating modes at the most critical conditions.
All Thermowell marine air conditioners are filled up with environmentally friend green refrigerant and no further charge is required before the installation on board

BB – Direct expansion split systems

BB is the range of splitted direct expansion and sea water condensed marine air conditioners, ideal for cooling/heating one or more contiguous cabins into small/medium vessels (8-18 m). BB’s are available in 6 sizes, from 8,000 up tp 24,000 BTU/h cooling power, in cooling only version, heat pump version with reverse cycle, or equipped with electric heater. BB series has an extremely light and compact design for easy installation and service. These air conditioners are made by two key components: condensing and ventilating unit. Usually the condensing unit is placed into the engine room, thus isolating the compressor noise, while the ventilating one is installed into one cabin, thus minimizing the volume required inside the living ambients. These two components are joined between them through insulated copper refrigerant pipes (2.5 m long pipes are supplied with the unit as standard). All components (high efficiency and noiseless compressors and blowers, corrosion resistant copper-nickel condenser, high and low pressure switches) are assembled on a 100% stainless steel case which assures a long life service and the collection of great quantity of condensate.

IZY Kit units

TECHNICAL FEATURES IZY09 IZY13 IZY16
Nominal cooling power [BTU/h] 9.000 13.000  16.000
Nominal heating power [BTU/h] 4.094 5.200  5.200
Nominal cooling power input [W]  860 1.300  1.700
Nominal heating power input [W]  1.200 1.500  1.500
Cooling current absorption [A]  3,6 4,3  4,7
Heating current absorption [A]  4,8 6,5  6,5
Power supply  220/1/50  220/1/50  220/1/50
Net weight [kg]  29 35  37
Sizes [mm]  620x283x303  570x330x370  630X340X350

 

UB – Direct expansion self contained systems

UB is the line of self contained direct expansion and sea water condensed marine air conditioners, ideal for cooling/heating one or more contiguous cabins into small/medium vessels (8-18 m). UB’s are available in 7 sizes, from 7,000 up tp 24,000 BTU/h cooling power, in cooling only version, heat pump version with reverse cycle and also equipped with electric heater. UB series has an extremely light and compact design for easy installation and service. All components (high efficiency and noiseless compressors and blowers, corrosion resistant copper-nickel condenser, high and low pressure switches) are assembled on a 100% stainless steel case which assures a long life service and the collection of great quantity of condensate.

UBK – Direct expansion self contained systems

UBK is the line of self contained direct expansion and sea
water condensed marine air conditioners, ideal for cooling/
heating one or more contiguous cabins into small/medium
vessels (8-14 m). UBK is available in 5 sizes, from 5,000
up tp 16,000 BTU/h cooling power, in cooling only version,
heat pump version with reverse cycle and also equipped
with electric heater. UBK series has an extremely light
and compact design for easy installation and service. All
components (high efficiency and noiseless compressors
and blowers, corrosion resistant copper-nickel condenser,
high and low pressure switches) are assembled on a 100%
stainless steel case which assures a long life service and
the collection of great quantity of condensate.
For an immediate use, these air conditioners are equipped
with a LCD back-lighted digital control panel and a practical
infra-red remote controller, both supplied as standard
components. The electronic controller has a highly innovative
PC board which manages all the functions of the
air conditioner (temperature setting, fan speed, operation
mode…) as well as the failures diagnostics through welldefined
alarm codes. The best quality of the treated air
is assured by the installation of an easily removable and
washable filter. Each unit is pre-charged, leak checked and
tested in all operating modes at the most critical conditions.
All Thermowell marine air conditioners are filled up with
environmentally friend green refrigerant R410A and no
further charge is required before the installation on board.
Thermowell supplies also all the items for the installation
on board of the whole air conditioning system, in order to
get a full customization (grilles, ducts, pumps, strainer)

UC – Sea water condensed chiller systems

UC is the Thermowell’s range of sea water condensed chiller units, available both in cooling only and heat pump version, specifically designed for installation into the biggest vessels. UC chillers are used to cool / heat a water – glycol mixing which flows through a closed loop of insulated pipes reaching every ambient inside the vessel where a fan coil is installed. Compact in sizes and easy in handling and maintenance, these units are the best choice for new and used or under refitting vessels. UC are available in 7 sizes, from 16,000 up to 50,000 BTU/h cooling power, in cooling only version or heat pump version with reverse cycle. All components (high efficiency and noiseless rotary or scroll compressors, corrosion resistant copper-nickel condenser, stainless steel brazed plates heat exchanger, high and low pressure switches, bi – flow thermostatic expansion valves) are assembled on a 100% stainless steel case which assures a long life service and the collection of great quantity of condensate. These units are equipped with a highly innovative electronic controller (eventually remotable for installation into the pilothouse or other technical rooms) which manages all the functions of the chiller as well as the failures diagnostics through well-defined alarm codes.

 

UC modul – Sea water condensed chiller systems

RCK chillers represent the maximum evolution in modular air conditioning systems. Thus, there is not a single big unit anymore, but the units become extremely flexible to the dif- ferent installation necessities and our customers’ exigencies. The RCK gamma is  composed of independent modules available in two sizes – 60.000 and 80.000 BTU/h – which are easily connectable to each other, both hydraulically and elec- trically, until a maximum of 8 modules and up to a maximal power of 640.000 BTU.

 

UC-I Sea water condensed chiller systems with variable capacity

UC-I offers to the marine industry an innovative technology for high performances with variable climatic conditions and an optimization of the consumption on board of boats & yachts.
UC-I is the new range of inverter chiller with sea water condensed, as a result of only italian research, design and manufacturing.
The inverter chiller unit, equipped with made in Italy control box and electronic thermostatic valve, optimize the cooling performance on varying the thermal load, achieving the best efficiency (COP).
The advantages:
– Models available: UC-I32H (32000 BTU/h) e UC-I52H (52000 BTU/h)
– Ideal for application in building or refitting of big vessels, with three or more independent
– Italian electronics innovative and reliable also thanks to the availability of spare parts for the long term use in case of necessity
– Antilocking system of the pump with turned off chiller
– Stainless steel structure
– Low operating noise and vibration
– No inductive loads at start up
– Energy saving
– Ease for installation
– Integrated automatic fuses with manual reset
– Control box with prewired EMC protected cable loom, which can be installed a maximum of 0,8-1 m from the chiller unit

 

UCP – Sea water condensed chiller systems

UCP is Thermowell’s series of sea water condensed chiller systems, available both in cooling only and heat pump version, specifically designed for installation into the biggest vessels. UCP chillers are used to cool / heat a water – glycol mixing which flows through a net of insulated pipes reaching every ambient inside the vessel where a fan coil is installed. Compact in sizes and easy in handling and maintenance, these units are the best choice for new and used or under refitting vessels.