The range of products designed for air treatment inside the vessels includes air extractors. EXT air extractors allow the expulsion of the vicious air outside from the leaving ambient (typical application is the air extraction from the toilets).
The prescribed air change number along the time and the ex- pulsion of the vicious air, assuring the finest quality of the air inside. Each unit is covered by an insulated box to reduce at the minimum possible the noise emission. Sizes and technical features (air flow, head pressure and cooling capacity) of air extractors are designed according to the specific needs of each vessel apart of those standard models described in the table below.
The range of products designed for air treatment inside the ves- sels includes air handling units (or fresh air units). Air handling units allow the external air to be treated (cooled, heated, dehu- midified) before entering the ambient of the vessel. Air handling units UTA are available as standard in 4 sizes from 300 up to
1400 mc/h. Air extractors allow the expulsion of the vicious air outside from the leaving ambient. The combined use of air con- ditioning system and air handling units the finest temperature and humidity control, the prescribed air change number along the time. Each unit is covered by an insulated box to reduce at the minimum possible the noise emission. Sizes and technical features (air flow, head pressure and cooling capacity) are de- signed according to the specific needs of each vessel apart of those standard models described in the table below.
With the aim of assuring the best air quality, the fresh air units can be equipped with optional systems of filtration, ionization and sterilization.
AirJet 12 e AirJet 24 are the exclusive and innovative sea water cooled boat air conditioner directly powered in 12V or 24V (direct current) from the battery bank of your boat, without using a generator or an inverter.
AirJet 12/24 is a well designed and elegant product which offers the most simple and versatile installation. According to the volume available on board for its installation, it is possible to choose between the split arrangement or 2 self contained arrangements, horizontal or vertical. AirJet 12/24 is the ideal solution for cooling single cabins. The heart of this air conditioner is a semi-hermetic horizontal scroll compressor using an advanced brushless DC motor (BLCD) which allows the direct connection to the boat’s battery bank, also avoiding, through a dedicated program of the compressor control driver, the start – up peak.
The blower can be rotated allowing many installation options according to the path of the air ducts.
The best quality of the treated air is assured by the installation of an easily removable and washable filter. Each unit is pre-charged, leak checked and tested in all operating modes at the most critical conditions.
All Thermowell marine air conditioners are filled up with environmentally friend green refrigerant and no further charge is required before the installation on board
BB is the range of splitted direct expansion and sea water condensed marine air conditioners, ideal for cooling/heating one or more contiguous cabins into small/medium vessels (8-18 m). BB’s are available in 6 sizes, from 8,000 up tp 24,000 BTU/h cooling power, in cooling only version, heat pump version with reverse cycle, or equipped with electric heater. BB series has an extremely light and compact design for easy installation and service. These air conditioners are made by two key components: condensing and ventilating unit. Usually the condensing unit is placed into the engine room, thus isolating the compressor noise, while the ventilating one is installed into one cabin, thus minimizing the volume required inside the living ambients. These two components are joined between them through insulated copper refrigerant pipes (2.5 m long pipes are supplied with the unit as standard). All components (high efficiency and noiseless compressors and blowers, corrosion resistant copper-nickel condenser, high and low pressure switches) are assembled on a 100% stainless steel case which assures a long life service and the collection of great quantity of condensate.
FC series of fan coils, also named air handler, are properly designed for marine applications. They can be easily ducted in order to distribute the air into the ambient from several points (air outlets). These models are suitable for installation in the lower part of the vessel, inside a cabinet or under a sofa or a bed.
FC models consist mainly in the following components: finned coil (water/air heat exchanger), high pressure centrifugal blower(s) equipped with internal high efficiency motor, deep stainless steel drain pan equipped with two holes for drain discharge, bleeder valve, fresh water inlet and outlet connection. Available in 7 sizes ranging from 5.000 to 24.000 BTU/h; FC18 and FC 24 models are equipped with two blowers.
Cooling, heating, dehumidifying with one single device, providing perfect temperature on board!
MBC Marine – SCP systems can be ordered are available in 7 types models ranging from 8000 to 24,000 BTU / h cooling capacity, but also available are fully we also produce customized units, having specific capacity to satisfy any individual needs.for individual sizes and applications. Thanks to its the heat pump design, it they also offer reverse cycle operation, thus providing a convenient solution for heating the airspace of the vessels in heating mode. SCP systems equipments are carefully designed to be lightweight and compact, for a quick and easy installation in any suitable room of every boat
The SDC range is the exclusive and innovative sea water cooled boat air conditioner directly powered in 12 V or 24 V or 48 V (direct current) from the battery bank of your boat, without using a generator or inverter. The SDC units is a well designed and elegant product which offers the most simple and versatile installation.
The blower also can be rotated (same like the SSC modells) allowing many installation options according to the path of the air ducts. The best quality of the treated air is assured by the installation of an easily removable and washable filter.
Our air conditioners are manufactured from durable materials using state-of-the-art technologies that ensure long service life and high quality. Each air conditioner unit is delivered in a pre-loaded condition, equipped with an eco-friendly cooling agent so no further installation or inspection is required for safe use after installation. MBC Marine also offers customers a wide range of accessories helping in selling and installing air conditioners. Among our products you can find air grilles, water pipes, circulating pumps as well as a wide range of accessories for professional installation.
MBC SSC equipments are self contained direct expansion systems specifically developed for boats ideal for simultaneous cooling and heating of one or more cabins. MBC Marine – SSC equipments are carefully designed to be lightweight and compact, for a quick and easy installation in any suitable room of every boat. The base plates of these units are entirely made of AISI 316 stainless steel, which assures a long service life and allows the collection of a large amounts of condensate water.
The SSC range is provided with an elegant LCD backlight digital control panel as a part of the standard installation kit. SSC systems are all available in heat pump version and in 5 sizes ranging from 6.000 to 16.000 BTU/h.
The Magnetic Circulation pump is a centrifugal drive pump, eliminating the need for a shaft seal. Pumps are serviceable with a screwdriver. The pump is able to be run fully submerged or in open air for complete moisture protection. It also can pump liquids with a specific gravity greater than water, have a higher viscosity.
Magnetic drive circulation pump is running on the shaft and impeller assembly of magnetic materials and attracted to each other coupled respectively ,don’t need to match with the traditional mechanical shaft seal, so it is completely sealed.
Motor rotation toque is through active magnetic and driven magnetic gravity drive blade work operation.It is the most ideal liquid pump on boat industrial equipment.
UB is the line of self contained direct expansion and sea water condensed marine air conditioners, ideal for cooling/heating one or more contiguous cabins into small/medium vessels (8-18 m). UB’s are available in 7 sizes, from 7,000 up tp 24,000 BTU/h cooling power, in cooling only version, heat pump version with reverse cycle and also equipped with electric heater. UB series has an extremely light and compact design for easy installation and service. All components (high efficiency and noiseless compressors and blowers, corrosion resistant copper-nickel condenser, high and low pressure switches) are assembled on a 100% stainless steel case which assures a long life service and the collection of great quantity of condensate.
