(Automatic davit with programable path for high loads). Davit completely built in varnished stainless steel provided with hydraulic movements of 1st jib rotation, 2nd jib rotation, 2nd jib up/down, telescopic 2nd jib, hook raising. The davit is projected to allow the haulage and launching of a tender from the garage or from the stern platform. Thanks to an accurate measuring and to acareful arrangement of the various components it creates the least encumbrance, when it is set in a completely closed position and at the same time it is free to do all the movements in phases of haulage and launcing. Adopting an innovating electronic control system it allows to program the optimum path for the haulage and launching of more tenders, reducing at the least the manual operations of the operator. For its compactness and its remarkable extension of the movements it can be considered an important and revolutionary component for the automation board. Please contact our Technical Office to customize some details.
Ceiling telescopic crane in two sides, re-entering in an auto-supporting box. Itçs fullyhydraulic and builts in stainless steel. It consents the movement of high loads (lifting-power and dimensions modifiables on request). An hydraulic windlass consents the lifting of the loads while the telescopic movement is produced by hydraulic pistons. The creeping of the elements is made with auto-lubrificant slides. The crane is furnished with a water-tight hand held remote control.
Lifting and translation system for tender. Composed by a primary structure with double beam that allows the lifting of tender with great dimensions, controlling at the same times the vertical encumbrance of the garage; while the second sliding element allows to carry the tender from the garage till under the bearing structure of the travel itself. The absence of electrical engines makes this structure suitable to be set in areas where it s possible the formationxplosive vapours. It could be built in stainless steel and/or light alloy in relation to the loads that have to be handled and to the working stroke.
This crane represents the compact model of the well-known Pin-Craft’s fly davit. Unchanged in the performances, ( oleo-dynamic movement of rotation, elevation, arm extension and winding of the lifting cable). Completely built in stainless steel, it’s projected for particular requirements ( for example: to be set under roll-bar) as the smaller height of the product allows a more ergonomic setting on board.
Turning-folding davit with double joint for the hindrances overcoming. Particularly suitable to be housed in the bow garages, where it allows an easy handling of the tender. The generous measuring of all its mechanical parts makes it adequate for the handling of high loads. Thanksto the special care used for its design it has ben possible to eliminate every \below-deck\component, making its location on board extremely easy. Please contact our Technical Office to customize some details.
Turning-folding davit with double joint for the hindrances overcoming. Particularly suitable to be housed in the bow garage, where it allows an easy handling of the tender. Adopting the telescopic jib can be increased its versatility as regards the model 39GR, creating less encumbrance of the davit in the §closed position§. The generous measuring of all its mechanical parts makes it adequate for the handling of high loads. Thanks to the special care used for its design it has been possible to eliminate every §below deck§ component, making its location on board extremely easy. Please contact our Technical Office to customize some details.
PIN-CRAFT ART. 35GS3 FLY DAVIT WITH DOUBLE TELESCOPIC ELEMENT
Telescopic davit with double telescopic element and oildynamic movements of rotation, raising, jib extension and winding of the load raising rope. The telescopic jib with double telescopic element allows remarkable straddle (5,5mt.) and at the same time a least encumbrance in the rest position living more free space on the fly allowing the transversal installation even on small lenght boats. The generous dimensioningh of the components allows the handlinf of over 500 kg. The davit is completely built in varnishee stainless steel in order to permit an harmonious placement aboard of the modern boats and it is finished with crankcases in composite material that protect the main mechanism and give rhe davit modern design, transforming the mechanic element into a piece of furniture. The davit is provided completely wired and with an oildynamic gearbox connected inside the base. The operator interface is possible by a water-tight hand held remote control that guarantees the highest secutity.
This innovative project combines together the classic crane function at the one of telescopic-mast for the handling of navigation lights. The system equipped with double arm allows to get cranes with considerable capacities without effecting aesthetically and functionally the telescopic-mast provided only as lights support. Also the overall dimensions are optimized and itçs also allowed a single interface with the boat.
Five axis crane-root with electronic position control and course of 1200 kg. Double articulation with telescopic jib, movements of up/down and raising hook. Full hydraulic, entirely built in stainless steel. As the model 40GRA, the crane allows to program optimum paths for the handling of 1 or more tenders through a self-learning system. The electronic precision control on all the 5 axis allows to get amazing results: just one operator is able to handle the tender in §one-touch§ way according to the programmed path and reducing at least the times of hauling and launch increasing at the same time the safety of the handling. Thanks to the accurate measuring of structures and moving parts the crane can operate under limit conditions off full load with angle of disbandment of 15°. A partcularly evolved elctronic box allows the complete automation and diagnostic of all the functions and interfaces itself with any automatism that interacts with the crane itself.
Electro-hydraulic structure combining the function of crane for tender and moto-scooter with the telescopic mast for bow lights one. Entirely built of stainless steel part polished, part varnished. Measures and loads capacities on request.
Overhead travelling crane with low impact profile; the device is suitable for the tender handling in the garage area. The careful study of the bearing structure and the low profile also allow the application of this crane inside particularly low garage. The absence of electric engines makes the crane particularly suitable to be set in areas where itçs possible the formation of explosive vapours.
Electro-hydraulic crane designed for Rescue Boats handling, entirely built in stainless steel, part varnished , part polished. Measures and load capacity on request.
PIN-CRAFT ART. 35GS3 FLY DAVIT WITH DOUBLE TELESCOPIC ELEMENT
Telescopic davit with double telescopic element and oildynamic movements of rotation, raising, jib extension and winding of the load raising rope. The telescopic jib with double telescopic element allows remarkable straddle (5,5mt.) and at the same time a least encumbrance in the rest position living more free space on the fly allowing the transversal installation even on small lenght boats. The generous dimensioningh of the components allows the handlinf of over 500 kg. The davit is completely built in varnishee stainless steel in order to permit an harmonious placement aboard of the modern boats and it is finished with crankcases in composite material that protect the main mechanism and give rhe davit modern design, transforming the mechanic element into a piece of furniture. The davit is provided completely wired and with an oildynamic gearbox connected inside the base. The operator interface is possible by a water-tight hand held remote control that guarantees the highest secutity.
PIN-CRAFT ART. 64GS3 ROTATING TELESCOPIC CRANE FOR GARAGE
Crane builts with double telescopic element able in order to contain crane encumbrances during inactivity phases allowing, on the other hand, a remarkable extension of the arm in position crane all-opened. All the movements: extension rotation, arm up/down, lifting cable, are generously measured and driven by hydraulic systems. Measures and load capacity on request .
Telescopic davit with oildynamic movements of rotation, elevation, extension of jib and winding of the lifting cable. It s built in stainless steel, part varnished, part polished to give an harmonious placement aboard of modern boats. The davit it s also refinished in glass fibre in order to protect main mechanism and to confer a modern design at the same time. The article is assembled and complete of hydraulic pump, electronic central system, with a water-tight hand held remote control.
Davit for tender handling from the stern garage; characterized by an arm with double telescopic element, which allows to keep small size in closed position,allowing however a great extension with the load. The geometry of the davit, by keeping a great space under the arm, allows to handling a large tender and its generous sized allow the handling of high load.
